917-563-7078
info@sunledind.com

Search Our Site

Specialists in LED Lighting and ENERGY EFFICIENCY Solutions             See Our Product Range
 
Area Carpark2

Area and Carpark


Our roadway lighting products provide optimum safety and security to outdoor areas
Read More
 
Architecturals2

Architectural


Building features are enhanced with crisp illumination from our architectural range
Read More
 
Commercial2

Commercial


The precise illumination of our LED commericial range provides reduced glare for a pleasant work ambience
Read More
 
Industrial2

Industrial


The bright even illumination of our Industrial range speeds production, and avoids on the job accidents
Read More
 

Better Work Environment with LED Lights

Improvement in the work environment has been shown to be closely linked to increased productivity. Research has shown that up to 5% better workplace productivity can be obtained with better lighting, often enough to achieve capital payback in a period of less than 1 year

As per square foot employee costs are 8-15 times higher than property costs, investing in good LED lighting results in significant financial gains


Effect of Lighting on Workplace Performance

There are 3 primary goals of a workplace environment

  • To create an appropriate and safe work area
  • Provide an aesthetically appealing and glare free lighting
  • Save energy

Light is directly related to better turnaround time, reduced errors and better psychological well-being. Employees in better working conditions work faster with less errors. Although capital payback in commercial lighting is the fastest in the construction industry with one of the highest returns on investment, proper investment continues to be a challenge.

A study found that 20% of employees were dissatisfied with indoor lighting with eyestrain the leading source. IESNA recommends 300 lux (28 Fc) for offices, but it can vary depending on the work type, age of employee and light preference type

 

                 * Majority of workers prefer lux levels other than that set out by IESNA

 

As it can be seen majority of workers prefer light levels other than that set out by IESNA, although it is possible to provide for everyone’s preferences using dimmable LED lights and dynamic lighting control with scenes. Dimming offers 50-90% in energy savings when combined with LED technology

LED gains are not limited to energy efficiency, LEDs also have uniformity ratio of 2:1 compared with 3:1 of fluorescent, preferred by employees


Lighting and Management Priorities

A survey of business executives demonstrated that increasing workplace productivity is amongst the top priority of achieving forecasts, more so than company expansion as demonstrated

 

                 * Majority of workers prefer lux levels other than that set out by IESNA

Lighting has a significant role to play in each priority

Major cause of workplace headache results from poor lighting

  • Increased Productivity

A study from the American Society of Interior Design found 70% of working top concern is interior lighting when reviewing the quality of workplace environment

  • Attracting/Retaining Good Workers

University study concluded good lighting improves profitability by 4-5%

  • Increasing Profitability

Cost Benefit Analysis

The effect of good workplace lighting can also be translated into real $ figures as demonstrated in a real life case study below.

Medium to large size office building

  • Building Area 10,000 (sq. feet)
  • Number of Employees 65
  • Average Occupancy (sq. feet/Person) 154

Based on a study by NEMA the following tables estimate employee and energy costs for a typical commercial facility

 
 

Research shows that effective lighting can increase productivity by as much as 3-5% and LED lighting can save an average of 25% on total power usages. Applying these figures to the human resources and energy operation costs calculated earlier we can forecast substantial savings

 

 

Although there are fair savings from reduced in energy usage of LED of $4,750, the real cost benefits come from potential gains to productivity, being in excess of $62,000! This shows that factoring in savings without productivity increases can be a gross estimation of potential gains by as much as 93% which can have important consequences for the payment period

Typically an LED project has a payback period of 2 years based on energy savings alone, but factor in productivity gains and it has payback in less than a month!

 

 
Productivity Savings
 
$62,600
 
 
Energy Savings 
 
$4,750 
 
 
Total Savings
 
$67,350
 

Latest LED Technology

SunLED Industries provides economical exterior, industrial and commercial lighting solutions using the latest high performance LED lighting technologies and practical design strategies. 

As a result of this approach we are able to reduce the overall finished construction cost of numerous applications and commercial construction projects.

See Our Product Benefits >


Dedicated Customer Support

 

Together with our professional services delivered by qualified industry experts we can provide complete service reliability designed to exceed customer expectations.

See Our Services >

Our Industry Partners

 

                                                                                    IES Logo                         1200px IEEE logo.svg                         PartnerLogos NAED 2

NEW Product Releases

Master 34jpg

Master


Modular Suspended LED Highbay
Queen 1

Queen


Microprismatic Surface Fixture
Lord 4 Industrial

Lord 4 Highbay


High Power LED Highbay
Spider 4

Spider LED


Round LED Highbay
Stealth2 6

Stealth II


Mid Power Area Light
Interceptor13

Interceptor


High Output LED High Bay
Large Eagle13

Eagle Eye


Mid to High Power Area Light
Solace

Solace


Spec Grade LED Bollard
HiCut

HiCut


Hi Cutoff LED Wallpack
Turret Mod A13

Turret Mod/A


Round Bulkhead Front Diffuser
DesignL2

Our Services

SunLED Industries are LED lighting distributers and designers specialising in exterior, industrial and commercial applications. You can view the full range of services by clicking on the services menu or links below

  • Lighting design and consultation
  • Sales and customer service support
  • Road and sports lighting
  • Cost analysis and reverse engineering
  • Renovation and retrofits
  • Modelling and 3D rendering
  • Lighting strategy reports
  • Energy saving calculations
  • Financial and payback analysis
  • Due diligence and witness consulting
 
Read More
 

Logo Solid Shape Layer 2

14210 Roosevelt Ave Flushing, NY 11354 United States +1 917 563 7078