EM-EMA Series

Integrated Emergency Driver

The EM-EMA series emergency LED driver is for field and factory installation that allows any Sunled 0-10V dimmable fixture to be used for both normal and emergency operation.

The unit contains a battery charger and inverter that operates a load of 8W or 18W with constant power at a rated output voltage of 170VDC. The patented constant power circuitry of the module maintains uninterrupted illumination levels during power failure

 

Armour logos3

 
 





  1. PRODUCT VARIATIONS
  2. FEATURES
  3. SELF DIAGNOSTIC
  4. OPERATION
  5. SPECIFICATIONS
  6. APPLICATIONS
 
Product Code

Example EM-EMA cat. 18.WW

 MODEL NO WATTAGE TEST SWITCH
EM-EMA 8 8W / 170VDC  WW Wired
Up to 50W Driver WL 2.4GHz Remote
18 18W / 170VDC 
Up to 75W Driver
 
NOTES
¹ The emergency driver is not compatible with non-dimmable fixtures when the driver wattages is less than the fixture wattage. 
 
Features
 
  • Constant power output in emergency mode
  • Optimized for higher voltage LED luminaires with 170VDC driver input
  • Self-sensing output voltage circuitry maximises product compatibility
  • High temperature recyclable lithium battery technology for significantly decreased enclosure size and longer operational life
  • Rated for use in plenums, damp locations, enclosed and gasketed fixtures
 
Self Diagnostic
 
The integrated self-diagnostic circuitry will automatically conduct 1 monthly 30 second and annual 90 minute tests to verify proper emergency capability per life safety code requirements NFPA 101 Life Safety Code outlines the following schedule:
 
Monthly
During AC mode, the system conducts a 30s self discharge test of the emergency LED driver every 30 days and automatically restores to normal charging after full discharge
 
Annually
During AC mode, the system conducts a 90 minute self discharge test of the emergency led driver every 365 days and automatically restores to normal charging after 30 seconds discharge
 
Operation
 
Normal Supply
During normal AC supply conditions the LED driver load will operate as usual and emergency driver remains in charging mode
 
Emergency Mode
When AC power fails the driver automatically switches to emergency mode, keeping the LED load illuminated at a reduced lumen output for a minimum of 90 minutes. During this time, the indicator will flash slowly (light on for 2 seconds, off for 2 seconds). When AC power is restored, it will return to charging mode and the indicator light remains on
 
Specification
 
Input Voltage: 120-347VAC 50/60Hz
Input Power: 12W Max
Output Voltage: 170VDC
Output Power: 8,18W Power Factor: 0.85
EMI Radiated/Conducted: FCC Class A Charge and EM Modes
Surge Protection: Meets ANSI/IEEE C62.41.2-2002
Emergency Operation: 90 minutes
Charge Time: 24hr Recharge
Ambient Temperature: Lithium -25°C to +40°C (-13°F to 104°F)
Approval: cUL Listed for Factory and Field Installation
 
 
Applications
 
  • Parking garages
  • Parking lots
  • General canopies
  • Stairwells and corridors

Similar Products

 
Argo1

EM-EMA


Integrated Emergency Driver
Lumina 1

EM-EMB


High Output Emergency Driver
Hawk Eye13

EM-EMS


Split Emergency Driver
Armour Plus13

EM-WPA


External Emergency Driver
Armour Plus13

EM-HBM


Highbay Emergency Driver

Logo Solid Shape Layer 2

100 Duffy Ave. Hicksville NY 11801 — United States +1 917 563 7078